Seamless coils are often installed directly in air-conditioned rooms, and their service status and quality of service can affect indoor noise levels and air quality. Therefore, it is necessary to do a good job in the daily maintenance of main components such as air filters, drips, discs, coils, fans, etc., to ensure that the fan coils function normally and have no negative effects. In addition, the seamless coil also undertakes the important task of transferring the low temperature of the hot and cold water to the air passing through the fan coil. To ensure efficient heat transfer, the surface of the coil must be kept as clean as possible. However, since the fan coil is generally equipped with a coarse filter, the hole is relatively large, and at the beginning of use, it is inevitable that dust will pass through the filter and adhere to the pipe or rib surface of the coil. If it is not cleaned in time, the heat exchange between the hot and cold water in the coil and the air flowing through the coil will be reduced, so that the heat transfer efficiency of the seamless coil cannot be fully utilized.

In fact, for the use of seamless coils, we also need to pay attention to its maintenance, which can be said to be very important, and we can do some of this maintenance for seamless coils.

Generally speaking, the thicker the wall thickness of the seamless coil, the more economical and practical it is, and the thin wall also has a greater impact on its processing cost. In addition, we can say that this process is able to determine its limitations, such as whether the wall thickness is uniform, the height of the brightness inside and outside the tube, whether the appearance is smooth and bright, etc. If we need to check seamless coils or plastic words, then we need to do offline processing.

As the air is cooled and dehumidified by the seamless coil, the resulting condensation will drip onto the drip pan and eventually drain out through the drain. Since the air filter of the coil is generally a coarse filter, some small dust will pass through the filter hole and adhere to the surface of the coil. When condensation forms on the surface of the seamless coil, dust will fall into the drip pan. Therefore, it is necessary to clean the drip tray regularly to clean up the dust deposited in the drip tray in time. Otherwise, too much dust deposited will temporarily reduce the water capacity of the drip tray. When a large amount of condensed water is generated, the condensed water will overflow from the drip tray, and the ceiling of the room will be damaged due to the untimely discharge. overflow. Third, it will become a breeding ground for bacteria and even mosquitoes, posing a threat to the health of indoor people.

In fact, whether it is an item or a person, daily sanitation and maintenance should be done well, which not only protects the service life of the item, but also indirectly protects its own safety and health. Seamless coils are widely used in life. Both enterprises and individuals must strictly require the cleaning and maintenance of seamless coils to form good cleaning awareness and habits.